5A03 Aluminum Sheet

5A03 Aluminum Sheet

  • Thickness: 0.1-500mm
  • Application: high-speed rail, high-speed, subway, light rail sound insulation and noise reduction

WhatsApp for Price: + 86 189 5460 7915

Description

5A03 Aluminum Sheet is a kind of AL-MG antirust aluminum alloy. It is the most commonly used material in construction.

The magnesium content of 5A03 is slightly higher than 5754 aluminum alloy. So the corrosion resistance and tensile strength of 5A03 are higher than 5754. The silicon content of 5A03 alloy is higher than 5754, so the welding performance is better than 5754. It can be used for gas welding, argon arc welding, Spot welding and seam welding.

Magnesium aluminum alloys such as 5A03 and 5754 have high strength. It is easy to process, easy to color and has good corrosion resistance. The strength is not affected by temperature and humidity. It has a lightweight and long service life. So, aluminum alloy sound barriers mainly use 5A03 and 5754 alloys.

JC Metal China is an 5000 series aluminum sheet supplier. The main type is 5005,5052,5052A,5052B,5059,5083,5086,5182,5252,5454,5754,5A02,5A03,5A05,5A06,5M52 aluminum sheet.

5A03 Aluminum Sheet Chemical composition

SiCuMgZnMnTiFeCr
3.2-3.8≤0.20.3-0.6≤0.150.00-0.50

5A03 Aluminum Sheet Characteristics

1. Excellent anti-rust performance, high strength. High fatigue strength, plasticity and corrosion resistance;
2. Excellent welding performance. Good cold workability;
3. The layout is neat. No burrs. No roll marks. No scratches. No oil spots. Its appearance is beautiful after oxidation treatment;

5A03 Aluminum Sheet Mechanical Properties

Tensile strength σb (MPa)≥175
Conditional yield strength σ0.2(MPa)≥80
Elongation δ5(%)≥15

Specimen Size: all wall thickness

Note: longitudinal mechanical properties of tubes at room temperature

5A03 aluminum plate Heat treatment

Homogenization annealing

Heating 460 ~ 475 °C; Heat Preservation 12 ~ 14h; air cooling.

Rapid annealing

Heating 350 ~ 410 °C; holding time 30 ~ 120 min; air or water cooling.

High temperature annealing

Heating 350 ~ 420 °C, holding time 10 ~ 30min when finished product thickness ≥6mm. When the thickness of the finished product is less than 6mm, the holding time is 2 ~ 10min and air cooling.

Low temperature annealing

Heating 250 ~ 300 °C, holding time 1 ~ 2h, air cooling.

5A03 Aluminum Sheet Price

  1. JC Metal China 5A03 Aluminum Sheet price = Ingot Cost/Raw aluminum cost + Processing cost.
  2. 5A03 Aluminum Sheet unit price is $/ton,$/kg,$/Pound,$/lbs.
  3. 5A03 Aluminum Sheet price will be different as per the below factors. Such as Length, Width, Thickness, State, Surfaces Treatment.
  4. Business Term: FOB,CFR,CIF,DDP,DUP…
  5. Payment Term: TT.LC.TT+LC…

Packing

1–Install wooden pallets. Use steel belts to reinforce them to avoid collisions during transportation.
2–Can be packed as per customer’s requirements.

Aluminum Sheet Plate Before Packing

Aluminum Sheet Plate After Packing

Aluminum Sheet Container Loading

5A03 Aluminum Sheet Technical parameters

Typical alloy5A03 aluminium plate
Material StateF,O,H12,H14,H16,H18,H22,h24,H26,H28,H32,H34,H36,H38,H111,H112,H114,
Thickness0.1mm-500mm
Width20mm-2650mm
Length500mm-16000mm
Typical products high-speed rail, high-speed, subway, light rail sound insulation and noise reduction

Market Applications

5A03 aluminum plate and 5754 aluminum alloy sound barriers are mainly used for sound insulation and noise reduction in transportation facilities. Such as expressways, elevated composite roads, urban light rail subways. Control the impact of traffic noise on nearby urban areas. It can also be used in factories and other noise sources. The sound insulation and noise reduction.

Related Products

2024-Aluminum-Sheet

2024 Aluminum Sheet

3005-Aluminum-Sheet

3005 Aluminum Sheet

5A03-Aluminum-Sheet

5A03 Aluminum Sheet

5A02 Aluminum Sheet

5A02 Aluminum Sheet

6061-Aluminum-Checker-Plate

6061 Aluminum Checker Plate

8006-Aluminum-Foil

8006 Aluminum Foil

7075-Aluminum-Sheet

7075 Aluminum Sheet

6005-Aluminum-Sheet

6005 Aluminum Sheet

4017-Aluminum-Checker-Plate

4017 Aluminum Checker Plate

Quenched Stretched Aluminum Plate

Quenched Stretched Aluminum Plate