5A02 Aluminum Sheet

Description

5A02 Aluminum Sheet is Al-Mg series rust-proof aluminum alloy. It cannot be strengthened by heat treatment. The alloy has a low magnesium content. Its plasticity is high, its formability is good, and its weldability is good. Cold deformation can increase its strength. The alloy has good corrosion resistance and is suitable for use in marine environments.

JC Metal is 5a02 aluminum plate china factory supplier. The main type is 5005,5052,5052A,5052B,5059,5083,5086,5182,5252,5454,5754,5A02,5A03,5A05,5A06,5M52 aluminum sheet.

5A02 Aluminum Sheet Chemical composition

Si	Cu	Mg	Zn	Mn	Ti	Fe	Cr	Fe+Si
≤0.40	≤0.10	2.0-2.8	—	0.15-0.40	≤0.15	0.00-0.40	0.15-0.4	0.00-0.60

Characteristics

5A02 aluminum plate has high plasticity and corrosion resistance. Cannot be strengthened by heat treatment. The plasticity is still good when hardened in semi-cold work. Low plasticity during cold work hardening. Good corrosion resistance and good weldability. Poor cutting performance. Can be polished.

5A02 Aluminum Sheet Mechanical Properties

Tensile strength σb (MPa)	≤147
Elongation δ10(%)	≥14

Specimen Size: Bar diameter (diameter of inscribed circle of square bar and hexagonal bar)≤150

Note: longitudinal mechanical properties of tubes at room temperature

5A02 Aluminum Plate Heat treatment

Homogenization annealing
Heating 440°C; Heat Preservation 12 ~ 14h; air cooling.
Rapid annealing
Heating 350 ~ 410 °C; holding time 30 ~ 120 min; air or water cooling.
High temperature annealing
Heating 350 ~ 420 °C, holding time 10 ~ 30min when finished product thickness ≥6mm. When the thickness of the finished product is less than 6mm, the holding time is 2 ~ 10min. Air cooling.
Low temperature annealing
Heating 250 ~ 300 °C, holding time 1 ~ 2h. Air cooling.

5A02 Aluminum Sheet Price

1. JC Metal China 5A02 Aluminum Sheet price = Ingot Cost/Raw aluminum cost + Processing cost.
2. 5A02 Aluminum Sheet unit price is $/ton,$/kg,$/Pound,$/lbs.
3. 5A02 Aluminum Sheet price will be different as per the below factors. Such as Length, Width, Thickness, State, Surfaces Treatment.
4. Business Term: FOB,CFR,CIF,DDP,DUP…
5. Payment Term: TT.LC.TT+LC…

Packing

1–Install wooden pallets. Use steel belts to reinforce them to avoid collisions during transportation.
2–Can be packed as per customer’s requirements.

Technical parameters

Typical alloy	5A02 aluminium plate
Material State	F,O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38,H111,H112,H114
Thickness	0.1mm-500mm
Width	100mm-2650mm
Length	500mm-16000mm
Typical products	Fuel tanks, GIS high-voltage switch housings, Flanges, Rivets or Welding rods.

Market Applications

Fuel tanks, gasoline and lubricating oil pipes. Flanges, light-loaded parts, interior decorations of ships and vehicles.

Related Products

5A05 aluminum plate.5A06 aluminum plate factory Supplying