Jasmin Bora
Jasmin Bora
Read 8 minutes

Canon Pixma MG2520 Setup and Troubleshooting

You are looking for guidance on how to do Canon Pixma MG2520 Wireless Setup? Don’t worry, we’re here to help you bring out the measures for Canon Pixma MG2520 Setup. You can come across a variety of problems when using a computer, it’s absolutely fine. My team is going to help you out with everything. Don’t worry about this we’ll help you in every possible way. Here are some of the steps for Canon Pixma MG2520 Printer Setup.

Steps to Canon Pixma MG2520 Wireless Setup:

  1. You must uninstall all sorts of security precautions from your printer. Lift the cover of the scanning machine of the printer. Open the paper output tray of the printer. Take out the holder of the cartridge and cut the safety materials as well.
  2. Put one end of the power cord in the proper printer interface and connect the other end to the wall power outlet.
  3. Switch the printer on to pick your language choice on the operating pad. Click the OK button for this.
  4. Switch it back off, Open the cover of the scanner. Place the holder of the ink cartridge back in place. Close the cover of the scanner. Switch the printer on. Click the Setup button and pick the Wireless LAN Setup button. Press OK.
  5. Choose Simple Setup, click OK. Pick Entry Point, click Yes. Enter the WEP icon, click OK.
  6. Place the setup Disc on the CD-ROM tray. Insert the tray.
  7. Run the MG2520 Canon driver application. Pick the country in which you live. Choose Next.
  8. Choose to install Fast. Download the software now.
  9. Pick “Use network printer” Tap the next one.
  10. Find your own on the list after the software has stopped finding the printer. Click the Next tab.
  11. Wait for the installation of the software. Click here to complete.
  12. The printer application menu appears on the computer screen signaling that the printer is ready to use.

Canon Pixma MG2520 Setup for Windows:

  1. Keep in mind that the following point is that your Windows prompts are necessary for drivers to update properly and to create a working link with the printer.
  2. Switch off your Canon MG2520 printer. It must be switched off in the first few measures before you are asked to turn it on.
  3. Your printer is expected to come with a USB cable. Attach your printer to your machine via proper ports, both on your computer and on your printer.
  4. Switch the Canon Pixma MG2520 Printer on now.
  5. Find the “Start” button on your screen and press the button to open the Control Panel display. Locate the hardware and sound option on the window. Look for Computers and Printers and choose the “Add Printer” option. Browse to “Local Printer” Note the port the printer uses to connect to your device. Please click on the port.
  6. A window is about to open up. On the window, click “Canon” and find your printer model. Click the Next tab.
  7. Choose a name to mark the printer, and then press Next.
  8. Specify whether or not you want the printer to be circulated. Click the Next tab.
  9. Specify whether or not you want the scanner to be the main printer. Click the Next tab.
  10. The Canon Pixma MG2520 printer is ready to use.

Canon Printer Pixma MG2520 Setup for Mac:

  1. Drag your web browser and check out this page.
  2. You can find the Support and Drivers on this website.
  3. On the Product Form List, find the Customer and Home Office choices.
  4. Choose Printers on the Product Family list.
  5. Find your printer model and press the link next to it.
  6. Select the Operating System drop-down menu. Download an acceptable version of Mac OS X.
  7. Upload the driver you want.
  8. Double click on the file and a new window will open when you download it. Click on the correct file and the installation will commence.
  9. Double click and Proceed. Choose Install.
  10. Attach a printer to a Mac with a USB cable. Switch the printer on.

What are the Troubleshooting Steps Involved in the Proper Functioning of the Canon Printer?

Canon printer has always endowed the best services to its users. You can now print your documents in the organization and can get the hard copies. But, sometimes, You face problems that will require Canon printer troubleshooting steps for you.

Here Are Some Solutions to Common Canon Printer Problems;

Canon Printer Does Not Print:

You can try to check the printer if it is properly plugged in and turned on. The printer will start printing once the lamp is on and is not flashing. You can just wait for the ON lamp to stop flashing. Printing starts as soon as the lamp is fixed. You can try to remove these print jobs from the queue and then retry to print your material. You can opt for troubleshooting for the Canon printer.

Canon Printer Print Very Slowly:

Slow-moving printers are one of the most common printer problems. This typically occurs when the equipment will be set to print high-quality output. You can increase printer performance by reducing print quality or changing the setting to draft mode. This will not only improve printer speed but will also help you save ink or toner. If you are printing pages from a website, this is another way to improve the speed of printing of devices to exclude graphics.

Fix a Paper Jam in Canon Printer:

A warning message or an alarm will notify you when a paper jam occurs in your printer. The first thing you should do is turn off the printer and then unplug it. Then, you have to gently pull out the jammed paper without touching the film or rail. You need to make sure that no slip of paper remains inside.

Faded or Printer Printing Very Light:

The issue of poor print quality is usually due to clogged print heads. Dried ink is usually the primary cause of printer blockage. This issue is common in inkjet printers. The printer may also have horizontal lines or are very speckled. So, you can clean the dried ink for troubleshooting the Canon Pixma printer using the printer’s utility program. When you run the program, you will need to print the test page to check if the issue is resolved or not. Sometimes a faded print may occur because the ink is about to run out. If you find this to be the culprit, you need to make sure that you replace the cartridge.

Canon Printer Says No Paper Alert Appears:

When no paper error appears on the printer, there may still be an object on the rear tray. You need to turn it off and unplug the Canon printer and remove the object.

The problem may also occur because the machine has not loaded paper properly. When you load paper, you need to make sure that the edges of the sheet are aligned. The paper must be loaded in the picture orientation.

The error will appear because the paper has been curled, rough, or curled. You can try to change the paper. In addition, you need to make sure that the paper you are loading matches the paper size settings of the file being replaced. You can also try to clean the paper feed roller to solve the problem.

Canon Printer not Printing Correctly:

Sometimes, the print job stops in the middle. This is not common if you are printing a photo or graphics-heavy material or file. When this happens, machines and computers can process large data. Once the processing is done, your printing will resume.

If your machine is printing for an extended period of time and because some parts such as the print head overheat it also stops printing. You need to allow the machine to rest for a while. If the printer does not start again, you must turn it off for at least 15 minutes.

Troubleshooting for Canon Printer

Best Methods: How do I Fix the Troubleshooting on my Canon Printer?

If you are having trouble printing or even turning on your Canon printer, you do not have to resort immediately to returning it or taking it to a printer repair facility. There are several different troubleshooting methods that you can get your printer into operating condition quickly, combined with your own and Canon’s printing software.

Method 1. You need to check that your Canon printer has indicator lights that flash in a specific pattern and then consult your manual to see if this is an error code. You can follow the instructions in the manual to fix the related problem. If you are not displaying a specific error code, you can also continue with more troubleshooting steps.

Method 2. You can go to troubleshoot the Canon printer by making sure the power code is plugged into the wall outlet and the USB cable is properly connected to the computer. You have to open the top of your printer and do a quick visual inspection to see if there is a piece of paper that is stuck in the paper feed.

Method 3. You need to restart the computer, and then if your computer has stopped recognizing the printer or the print queue has stopped responding due to a software error in your printer, you need to try to print something new.

Method 4. You will also have to go to your computer’s control panel and click on the option “Printers and Faxes”. If your Canon printer does not appear in the list, you will need to click on the tab of the “Add a Printer” button. You must follow the on-screen instructions so that your computer runs a test so that you can try to locate the printer. In this way, you can successfully go to troubleshoot Canon printer problems.

Method 5. You’ll also have to try uninstalling and reinstalling the Canon printer software that came with your printer, and you can then navigate to their official web page on your web browser. You can also download the most recent version of the software driver.

2 views
Add
More