Troubleshooting Wavlink Extender Red Light Issue

Many Wavlink extender users have been complaining about seeing the red light on their devices. Are you also among them? If yes, then this post will be your one-stop solution to help you fix the red light on your extender.

Just, have a glance at the troubleshooting tips we’ve shared below and follow them to return your Wavlink extender back to its normal working state. However, before trying any hack, ensure that you have completed the Wavlink WiFi extender setup process.

Fixed: Wavlink WiFi Extender Red Light Issue

1. Check Power Socket

The very first reason behind the Wavlink extender red light issue is a fluctuation in electricity. Chances are that you have used a damaged power socket to power up your extender. Thus, have a look at the same and verify if what we’ve said is true. In case it is, then you are advised to change the power socket as soon as possible.

Also, check the power cord of the extender as its worn-out state can also drag you to the extender red light issue.

1. Upgrade the Firmware

Your WiFi extender might also flash red light if its firmware is outdated. Know that the instructions on which your extender functions are collectively termed firmware. Thus, you can’t let it go outdated. Before you run out of time, access the Wavlink WiFi window and update your extender’s firmware. Here’s how:

• First of all, consider downloading the latest firmware file for your extender.
• Access the extender’s IP address.
• Do the WiFi extender login with the default username and password.
• Once you see the WiFi extender dashboard, click the Web Upgrade option.
• Click the Upload button and look for the firmware file you downloaded.
• Let the extender get updated.

1. Reboot the Extender

Technical glitches are unexpected errors and can occur at any time. Perhaps, they are affecting the extender’s performance and forcing it to flash the red light. Thus, eliminate them to get rid of the issue at hand. Check out the steps mentioned below to reboot your WiFi extender:

• Power off your Wavlink extender before unplugging it from the wall socket.
• Let the extender stay idle for a few moments.
• Plug your WiFi extender back into the power socket and switch it on.

1. Bring Your WiFi Devices Closer

At times, a large distance between your Wavlink extender and the host router becomes the major cause behind the red light issue. Thus, reduce it to a minimum. However, consider not making it zero. Otherwise, you will soon witness more extender-related issues due to a clash of your extender and router’s WiFi signals.

You can also use a wired source i.e. a network cable for creating a connection between your devices. But, make sure that it is not fragmented from any end. Else, the issue will continue to trouble you. Also, check the finger-tightness of the connection.

1. Remove WiFi Interference

The Wavlink extender red light issue might also be a result of signal interference. Signal interference is any obstruction in the path of the extender’s WiFi signals. Therefore, either change the signals’ paths or remove those obstructions from the path of the extender’s signals.

Thus, place your WiFi extender away from devices emitting radio-wave frequencies, electrical appliances, reflective surfaces, masonry constructions, and objects carrying a large amount of water. Do not place the extender in a corner. Choose an airy room that is in the center of your house.

The Conclusion

This is how you can bid adieu to the Wavlink extender red light issue. Hopefully, the extender will now work in the normal state. If you are still unfortunate, then don’t waste time performing a factory default reset of your Wireless extender.

Once you do that, your extender will start working on the factory default settings. It means you have to customize the WiFi extender login password and SSID. Once done do not forget to perform the wifi.wavlink.com setup. This time you’ll surely get success.